Build a fun Covered Wagon that actually moves with just a few items you can find around the house. This is a fun craft for kids, parents, teachers and educators to learn to build, and you can make it with very simple supplies. Just follow the instructions, and view the video and photo step-by-step instructions at the below links for more specific information.
Covered Wagon
Always use your imagination and be creative when building this project or any others. It's your creation, so be inventive when looking for building supplies - you just may be surprised! When building your project, experiment with new and different ways of putting it together. The most important thing is to have fun!
Find these or similar supplies!
* 1/2 gallon juice or milk container
* Cereal box or some cardboard
* Regular masking tape
* Brown paper bag
* 4 plastic container lids
* 1 big straw
* 4 small straw
* 4 feet thin wire (coat hanger)
1. Cut your container!
Start out by cutting your juice or milk container in half. This is fairly difficult to do, so take your time. I usually us a ruler to mark my cut line all the way around before I make any of my cuts. Then I like to use a utility knife and a pair of scissors to make all the cuts. You may have noticed that I used the half with the cap on it. This way, when someone sees my covered wagon, they will know what it was built from.
2. Tape your wagon body!
Next cover your wagon body with tape. I usually spend quite a bit of time on taping my projects so they will look cool. Starting from the bottom up, run your tape all the way around. Then overlap your tape a bit with additional tape and give it another layer. To completely cover the container's print, you will have to give it 3 or 4 layers of tape. The more time you spend, the nicer the job. Another tip is I always use scissors to cut the tape, trimming, altering and modifying as I go. I also modified the front a little. Its your project, so see what you can come up with.
3. Make the seat!
To make my bench seat I got a little carried away. The simple way is to cut two pieces of cardboard out for the bench sides and glue or tape them in place. Cut one or two rectangle pieces as shown, cover them with tape and attach them to your bench sides. If you feel up to the task you can make some fancy back supports. You can see in my photos that I used some pieces of old shishkabob sticks to make my back rest supports. Then I cut, covered and attached the back rest.
4. Make the cover frame!
Making the cover for your wagon so that it is a covered wagon is pretty simple. You could simply take a piece of paper and cut it to the width that you want and bend it into the shape you like and attach it to the sides of your wagon. You could find some pipecleaners, or a bendable straw. We would love to see what you can come up with.
5. Make the cover!
I cut some straws into 6 small pieces and glued them into the inside of my wagon. You can tape them into place if you like. Then I cut three equal pieces of wire about 14 inches. But you can use anything you'd like... pipecleaner lengths or bendable straws work well too. I carefully bent them into shape and placed them into my straws. I then cut a piece of brown paper bag to fit over my wire supports. After making sure it fit, I crumpled it up so that it looks like old piece of canvas, and I then taped it carefully into place from the inside.
Wheels can definitely be difficult. A simple way to make them is by cutting out four circles from your cardboard box. Maybe even draw spokes and rims on them and then attach them to the sides of your wagon. But if you want your wheels to actually roll, here's what I did:
6. Make the axles!
Making the rear wheel axle and support is fairly straightforward. I cut a fat straw to the width of the bottom of my wagon, and then taped it onto the bottom as shown in the photo. I then inserted my axle straw into it. Leave your axle straw long and cut it to length when you attach your wheels.
7. Finish the axles!
For my front wheel axle, I decided I didn't like its location on the wagon bottom... the wheels looked too close together to me. If you like, just repeat step 5 for the front of your wagon bottom. Instead I cut a rectangle piece of cardboard and taped it to the bottom with about an inch hanging out the front. I then taped my axle assembly to it. This is all up to you and how you want your project to look, so have fun and try different things.
8. Attach the wheels!
I attached my wheels using a hot glue gun. However, you could simply tape them on instead. First, I glued the wheels onto one side leaving my axle straw a little long. Next I glued my wheels onto the other side making sure that they were centered as best as possible. VOILA! - You're finished!
With most projects I build there is never really a point where my project is completely finished. I could keep adding and adding smaller details to it. At some point I stand back, look at it and say COOL! It's done! Other times I come back and see it and think of something else I could do to it. The point is to is have fun, experiment and try using different materials and ways of putting things together!
Buying Animatronic Halloween Promotional Enfamil Nursette Newborn Grand Brand Piano Save
